Direct answer
Yes. Splice Maven QA can be used to manually document splice jobs with different press brands. The operator records the equipment identity, inspections, temperature and pressure readings, photos and signatures. This is an independent QA-recording workflow; the app does not connect directly to or control the press.
Which press brands can be documented in Splice Maven QA?
Use the same manufacturer-neutral recording workflow for splice jobs using WAGENER, NILOS, Almex, STARK or Beltwin presses. Identify the actual equipment in the job record and enter the readings and evidence observed for that job.
The brand names identify equipment used on the job. Splice Maven QA is independent software; this description does not imply a manufacturer partnership, endorsement or certified controller integration.
What should a splice press process record contain?
| Record | Specify | Interpretation |
|---|---|---|
| Job and equipment | Splice ID, press/controller identification and setup | Which joint and equipment produced the record? |
| Required cycle | Applicable belt/kit instructions and revision | What was the approved target? |
| Temperature readings | Sensor identity, location, timestamp and unit | Which measurement does each value represent? |
| Pressure readings | Measured quantity, measurement point, timestamp and unit | Can it be compared with the specified requirement? |
| Deviations | Time, observation and the authorized review decision | What happened and how was it resolved? |
| Completion evidence | Photos, inspections and sign-off requirements | Which acceptance evidence was retained? |
What does working with a press mean for the QA record?
Splice Maven QA works offline on an iPhone or iPad. Record manually entered inspections and process readings, add photographs and signatures, then preview or export the job report. The recording workflow is separate from the press controller.
Keep the source of each reading clear. If the equipment provides its own process record, retain that record alongside the field observations as appropriate. Manually entered values should remain identified as manual entries; the app does not automatically import press telemetry.
Steel Cord Splice and Fabric Belt Splice
Choose by belt construction. The product pages describe each program's planning workflow and current availability.
- Steel Cord Splice: steel-cord layouts, field drawings, cable schedules and the analysis features described on its product page.
- Fabric Belt Splice: fabric-belt step and finger layouts, dimensioned drawings, stress analysis and cure modelling.
The Steel Cord Splice product page currently lists App Store preparation. Fabric Belt Splice has a released worked example. Keep the applicable belt and kit supplier instructions with the software plan.
Sources & scope
This guide describes manufacturer-neutral manual QA records using the published Splice Maven QA workflow. The named equipment brands do not imply OEM endorsement, direct controller integration or approval of a cure cycle.
- Splice Maven QA: manufacturer-neutral field records
Published features include equipment traceability, manually entered readings, photos, signatures and exports. The app does not control a press.
- Splice Maven QA support and recording workflow
Use the actual app instructions for creating, reviewing and exporting field QA records.
- Steel Cord Splice
Steel-cord layout and analysis program; see its product page for features and availability.
- Fabric Belt Splice
Fabric-belt step and finger layouts, drawings, stress analysis and cure modelling.
This AI-assisted guide combines linked primary references, Maven product descriptions and original planning examples. Examples are labelled; equipment-specific decisions require the applicable approved specification.