Follow the belt through a revolution.
See the lateral movement, its direction, and whether the pattern repeats as the belt comes around again.
Tracking Maven
Send us a video of 2½ complete belt revolutions at the tail or take-up. We’ll generate a tracking profile of your belt.
See how your belt moves through each revolution, and when its tracking changes.
Your belt video · A measured tracking profile · Maven Software
Make the movement visible
A tracking profile shows how the belt moves sideways over a complete revolution. Matching the graph to the footage makes changes easier to see and discuss.
See the lateral movement, its direction, and whether the pattern repeats as the belt comes around again.
In this example, the belt and rollers are identified and a moving cursor follows the video as the splice passes and the belt shifts.
The example graph shows lateral offset relative to belt width. Each review uses the footage and information available for that belt.
What to send
Film at the tail or take-up from a safe, fixed viewing position. Keep recording continuously so the same section of belt comes around more than twice.
Hold the same view throughout the recording, without panning or zooming.
Keep the belt edge, rollers, and surrounding fixed structure in view, with enough room to see the belt move sideways.
Keep the full recording. Include the belt or conveyor identifier and a brief description of the tracking problem.
Request your belt’s tracking profile
Contact Maven Software with a brief description of the problem. We can arrange how to transfer your video and review the belt.
Email AndrewAndrew I. Hustrulid, PhD, PE
Maven Software Inc.
andrew@hustrulid.com
You can start with the video and the tracking question.
Message Maven Software on LinkedIn